Our single step collision detection (ISP) motor column.
Electric Motor Desks
Top Motion - Base
Top Motion - Base
TM Q70/3 - Square
The TM Q70 is a three-stage square motor column.
Specs
| Description | Lift column with inline motor drive, column made of precision steel tube. |
| Material | Precision steel square profiles, inner, middle and outer profile powder-coated or chrome-plated. |
| Guide | Concealed plastic corner gliding system |
| Dimensions | Outer profile 2.70“ x 2.70“ | Middle profile 2.63“ x 2.63“ | Inner profile 2.54“ x 2.54“ |
| Adjustable range | 19.90” – 45.90” (type YWK) ANSI – BIFMA range |
| 22.80” – 48.70” (type TMH) | |
| The actual working range is defined by the control box. | |
| Max. lifting force | 800 N (single column) 1000 N (table with 2 lift columns) Load symmetrically distributed, no additional bending moment. Weight of frame and tabletop must be taken into account. |
| Max. tensile force | 400 N. The column must be mounted in a way to ensure that the tensile force during the retraction motion does not exceed 400 N. |
| Max. bending moment | static 400 Nm up to BH=31.5“, above 200 Nm dynamic 120 Nm (Table with 2 lift columns) |
| Lifting speed | 50 mm per/sec |
| Noise level | < 50 dB(a) |
| Drive | Inline DC drive (patented) |
| Rated voltage / Rated power | 28 V (DC) / ca. 140 W (single column) |
| Max. duty cycle | 10% (2 minutes ON / 18 minutes OFF) |
| Base | User Specified |
Top Motion - Base
TM R70/2 - Round
The TM R70 is a two stage round motor column
Specs
| Description | Lift column with inline motor drive, column made of precision steel tube. |
| Material | Precision steel square profiles, inner, middle and outer profile powder-coated or chrome-plated. |
| Guide | Concealed plastic corner gliding system |
| Dimensions | Outer profile 2.7“ (70mm) | Inner profile 2.63“ x 2.63“ (63mm) |
| Adjustable range | 24.50” – 44.40” (type YSB) |
| The actual working range is defined by the control box. | |
| Max. lifting force | 800 N (single column) 1000 N (table with 2 lift columns) Load symmetrically distributed, no additional bending moment. Weight of frame and tabletop must be taken into account. |
| Max. tensile force | 400 N. The column must be mounted in a way to ensure that the tensile force during the retraction motion does not exceed 400 N. |
| Max. bending moment | static 400 Nm up to BH=31.5“, above 200 Nm dynamic 120 Nm (Table with 2 lift columns) |
| Lifting speed | 50 mm per/sec |
| Noise level | < 50 dB(a) |
| Drive | Inline DC drive (patented) |
| Rated voltage / Rated power | 28 V (DC) / ca. 140 W (single column) |
| Max. duty cycle | 10% (2 minutes ON / 18 minutes OFF) |
| Base | User Specified |
